Loading...
“HR” Hi-Flite Round-Bottom Elevating2017-01-28T16:39:19-06:00

“HR” Hi-Flite Round-Bottom Elevating

The High-Flight Round-Bottom Conveyor utilizes the same maximum clean-out features as our Round Bottom conveyor, while also providing the maximum volume of material within the trough structure. Unlike En-Masse conveyors, the ‘HR’ unit is designed with special UHMW flights and divider pans to convey large quantities with inclines of up to 45°, with some material up to 60°, thus not allowing the material to cascade back down the incline. When the head section is above 45°, a reverse-incline may be required for optimum discharge. The standard ‘HR’ self-metering inlet only admits as much material as the carrying section of the trough will hold. Sizes are available with capacities up to 7,875 BPH (9,843 CFM).

“HR” Hi-Flite Round-Bottom Elevating – Options

> Direct Inlet
> A.R. Steel Liners
> Stub Discharge

> End Relief Door
> Incline Bend Section
> Reverse Bend Section

> Inspection Door
> Discharge Gates

"HR" HIGH-FLITE ROUND-BOTTOM CAPACITIES *
FPM100125150175
SIZEBPHCFHBPHCFHBPHCFHBPHCFH
915001875187523432250281226253281
1225003125312539063750468743755468
1645005625562570316750843778759843
"HR" HIGH-FLITE ROUND-BOTTOM DIMENSIONS
SIZE14BCDEFGHJKLMNPRSTU
9101017158524107 1 / 21 5 / 840 1 / 1627 3 / 815 7 / 81 15 / 161 7 / 164 1 / 2582
121314 1 / 423 3 / 419 3 / 410 1 / 45 1 / 230119 1 / 22 1 / 85440.523 7 / 82 3 / 161 15 / 164 1 / 2704
161720 7 / 830 1 / 226 1 / 2145 5 / 8301612 1 / 22 1 / 25446 1 / 223 7 / 82 7 / 162 3 / 165 1 / 2704